How to Connect Two Receivers to One Set of Speakers

Written by
Last update:

Why Connect One Set of Speakers to Two Receivers?

In this article, we are going to discuss how to connect two receivers to one set of speakers. A very common request to help the non-audiophile music lover get the best possible sound from their system. This is usually with a home theater amplifier and an av receiver for the music. In this setup, only one amplifier is needed, but two receivers need to be connected with one set of speakers.

The basic use of a receiver is to amplify and prepare the audio signal for a speaker system. So now that you know a little about receivers, let’s look at how you can connect two receivers to one set of speakers by using a speaker switch.

What Speaker Switch to Use Connect Two Receivers to One Set of Speakers

A basic speaker selector is designed to allow just one receiver at a time connected to one set of speakers. It is becoming a common problem for listeners who want to connect two stereos or receivers to the same speakers. A speaker selector is the best option if you have only one stereo system.

However, you can also connect two receivers to the same set of speakers, either using an auxiliary input (or headphone jack) or a speaker switch. These two products accomplish the connection in different ways but have the same result.

An auxiliary input connects the audio from a single stereo into an amplifier output. A speaker switch allows you to connect the audio from multiple stereos into an amplifier input. You can use either solution to connect two receivers to one stereo, two stereos to one receiver, or one stereo to multiple receivers.

The next step would be to use a Y connector to connect both receivers to your speaker cable. The last step would be to connect everything into a single amplifier.

1 – Niles DPS-1

Let’s face it. Speakers are a big investment. If you have already fallen in love with a system that is outside of your budget, you understand how frustrating it can be to have to forgo that must-have upgrade.

Speaker cables account for the majority of the price of a high-quality audio system. But when you need a long cable to connect a powered sub to the main speakers, adding it to the cost of the other cables of the set can get very expensive.

Now you can eliminate the need for long, expensive speaker cables. The DPS-1 from Niles is an ingenious and simple solution to this problem.

The Niles DPS-1 is a speaker system that features two separate channels. One of the channels is for the "left", and the other is for the "right". This setup allows you to connect these channels to another speaker system, creating a successfully sound.

In addition to creating a daisy-chained speaker system, the DPS-1 features a Phantom Powered Subwoofer Port that can power a self-amplifying powered subwoofer. This capability allows you to exchange the cheaper passive subwoofer for an expensive, self-amplifying subwoofer without the need for long cables.

2 – Specialty-AV Switch

If you have two devices with RCA jacks that join your television to your receiver and want to share the speakers, then a specialty AV switch box for this purpose will help. These allow both the audio and video signals to be shared through the same set of speakers. These specialty boxes are similar to the ones used to switch between two televisions, except that they are used for switching between two sources from different devices, and not the two televisions. These boxes are great to keep if you have the space, but they are also the more expensive way to go.

3 – Jamo JSS6-VC2

The Jamo JSS6-VC2 speaker selector allows you to simultaneously distribute music from two sources to six pairs of speakers. Each pair of speakers can be turned on and off, and you can even control the volume for each individual pair. It's a practical option to connect two receivers to one set of speakers, and it also gives you the flexibility in the long run to add additional pairs of speakers.

A More Affordable Option: Banana Plugs

One of the easiest ways to wire two receivers to one set of speakers is to use 2-prong to 3-prong adapters. These adapters are small and unobtrusive, so they don’t add much bulk to your receiver. They allow your receivers to plug directly into your speaker set.

Most 2-channel receivers have the same number of RCA inputs as they do stereo inputs. This means that you can connect the stereo outputs (red and white) to the bottom pair of RCA inputs (this is assuming you have the option to use either RCA or stereo inputs on your speakers). You can then connect both of your receivers to the stereo outputs.


Using any of the aforementioned options, you can easily connect two receivers to one set of speakers. Choose which one works the best for you and enjoy the ambiance of your home theater!